Test Probes
LD Microprecision designs, manufactures, and markets a wide range of test probes (both cantilever & blade) commonly use in the die-sort and wafer mapping process. Our specially designed equipments and proprietary processes enable us to produce ultra fine probes with tight tolerance specification to ensure effective and long lasting applications. Tips radius down to six(6) microns can be maintained.
Material:
- Tungsten Rhenium (WR)
- Tungsten (W)
- Beryllium Copper (BeCu)
- Paliney 7 (P7)
Sizes:
- 0.20mm (8mils)
- 0.25mm (10mils)
- 0.50mm (20mils)
| Product Code | Material | Probe Diameter | Taper Length | Tip Configuration | Length | Part Number |
|---|---|---|---|---|---|---|
| TP | WR | 10 mils | 2.65 | Flat | 2 inch | TPWR10-2.65-F0.5-2.0 |
| TP | W | 20 mils | 2.65 | Radius | 1.25 inch | TPW20-2.65-R0.2-1.25 |
| TP | BC | 8 mils | 2.65 | Flat | 2 inch | TPBC08-2.65-F0.4-2.0 |
* For sizes not found above, we can custom made to meet customer requirements.
-
Solder Paste Mixing and Thawing Machine
Equipment & OthersThe LD Microprecision Shaker Array Solder Paste Thawing and Mixing machine utilizes the high effecient 'Trapezoidal' tumbling concept that provide effective agitation to the contents. This patented concept comprises four(4) chutes specially designed each with three(3) ventilating holes that allow room air draft to be drawn inside to accelerate the thawing process of the contents. This is the most effective thawing machine in the industry.
The thawing process can be direct from the freezer (-40°C -60°C) and it will take less than 25 minutes to completely thaw to the room temperature. Thereafter, the mixing and kneading (softening) process will continue to the next 20 minutes. This latest model is PLC pre-programmed to spin alternatively to accelerate both thawing and mixing process.
-
-
Handy Redress Tool
Equipment & OthersHandy Redress Tool is a wire correction pen which helps you to improve on your wire bonding yield and output productivity.