Push Up Needle
Push up needle is mostly used in die bonding and die sorting process. Our micro grain material ensures long life application. The polished spherical tip minimized chip or crack die related problem. Full range of tip configurations are manufacture for various applications.
Material : Tungsten Carbide, High Speed Steel, Stainless Steel, Plastic Tip
Shank Diameter : 0.70mm , 0.68mm, 0.50mm, 0.40mm
Please contact our sales representative for customize or special design request.
| Product Code | Material | Shank Diameter (mm) | Angle | Radius (mm) | Length (mm) | Part Number |
|---|---|---|---|---|---|---|
| PN | C | 0.7 | 10˚ | 0.015 | 17 | PNC-10-015-170 |
| PN | H | 0.4 | 15˚ | 0.015 | 17 | PNC-10-015-170 |
| PN | S | 0.7 | 20˚ | 0.100 | 15 | PNS-20-100-150 |
| PN | SPB | 0.7 | 25˚ | 0.075 | 17 | PNSPB-25-075-170 |
Related Products
-
Rubber Collet
Die BondingRubber collet is the most commonly used pick-up tool in the industry. The material is non-conductive and anti-static. Our wide range of rubber pick up tool are widely used in die pick, we provide variety of size to meet different application for normal temperature and high temperature with hole size down to 80 micron.
Rubber Collet Holder Size: H1= 1.6 x 1.6 mm H2= 2.6 x 2.6 mm Other= Customize Size -
Tungsten Carbide Die Collet
Die BondingTungsten carbide die collet are mostly used for eutectic die attach with scrubbing. This tools offers good placement, long lifetime and it is not temperature-sensitive. One common problem is the chipping of the die due to its hardness. LD Microprecision design and produces wide range of high performance die collet with hole size down to 80 micron.
-
High Temperature Pick Up Tool
Die BondingThe Hitemp plastic pick up tools serve the purpose for assembling the small dice especially for die sizes < 25mil. The plastic material is harder then rubber material. This makes it possible to machine the tip to very small and close tolerances to enable accurate placement capabilities. LD Microprecision design, manufacture and market wide range of high-temperature pick up tool with hole size down to 80 micro & tight tolerance spec.
-
Epoxy Stamping Tool
Die BondingStamping tools are also called as transfer or printing tools because they really stamp epoxy onto the pad. Unlike the dispensing tool, the epoxy does not flow through the part and onto the pad. The tools pick up epoxy from an epoxy tray and stamps the epoxy down on to the pad. The tools come in various design such as deep groove, cross, star and single dot.