High Temperature Pick Up Tool
The Hitemp plastic pick up tools serve the purpose for assembling the small dice especially for die sizes < 25mil. The plastic material is harder then rubber material. This makes it possible to machine the tip to very small and close tolerances to enable accurate placement capabilities. LD Microprecision design, manufacture and market wide range of high-temperature pick up tool with hole size down to 80 micro & tight tolerance spec.
| Material | Code | Hardness | Max Temperature | Resistivity Range |
|---|---|---|---|---|
| Vespel (SP-1) | 01 | Rockwell E58 | 480℃ | Insulative |
| Vespel (SP-21) | 02 | Rockwell E40 | 480℃ | Insulative |
| SEM 5000 | 03 | Rockwell M105 | 260℃ | Dissipative |
| PBI SCM 7000 | 04 | Rockwell A50 | 410℃ | Insulative |
| PBI SCM 7400 | 05 | Rockwell A50 | 410℃ | Conductive |
| Torlon (PAI) | 06 | Rockwell E86 | 260℃ | Insulative |
| Delrin (POM) | 07 | Rockwell M92 | 135℃ | Insulative |
| Nitrile Rubber | NBR | 60-80 Shore A | 120℃ | Insulative/Dissipative |
| Silicon Rubber | SW | 60-80 Shore A | 260℃ | Insulative/Dissipative |
| Fluroelastomer | HT | 75 Shore A | 250℃ | Insulative |
| Tungsten Carbide | W | HRC 81 | >500℃ | Conductive |
| Product Code | Material Code | Model | OD | ID | Part Number | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | mils | mm | mils | ||||||||
| HPC | 01 | 05 | 0.30 | 12 | 0.15 | 6 | HPC01-05-012006 | ||||
| HPC | 02 | 80 | 0.50 | 20 | 0.25 | 10 | HPC02-80-020010 | ||||
| HPC | 03 | 77 | 1.52 | 60 | 0.75 | 30 | HPC06-77-060030 | ||||
-
Tungsten Carbide Die Collet
Die BondingTungsten carbide die collet are mostly used for eutectic die attach with scrubbing. This tools offers good placement, long lifetime and it is not temperature-sensitive. One common problem is the chipping of the die due to its hardness. LD Microprecision design and produces wide range of high performance die collet with hole size down to 80 micron.
-
Epoxy Dispensing Tool
Die BondingEpoxy dispensing tools deposit epoxy onto the die pad before a pick-up tool places a die on it. The dispensing tool has basically 2 parts - a stem with a luer-lock head which goes into the syringe containing the epoxy, and a body which has reservoir to contain the epoxy in the dispensing tool. The dispensing tools comes in different shapes.
Please contact our sales representative for customize or special design request. -
Rubber Collet Holder
Die BondingCollet holder is a connected tool for the rubber tip installation, we can provide a variety of collet holder for different sizes and different machines with stainless steel as the main material.
Rubber Collet Holder Size: H1: 1.6 x 1.6 mm H2: 2.6 x 2.6 mm Other: Customize size -
Rubber Collet
Die BondingRubber collet is the most commonly used pick-up tool in the industry. The material is non-conductive and anti-static. Our wide range of rubber pick up tool are widely used in die pick, we provide variety of size to meet different application for normal temperature and high temperature with hole size down to 80 micron.
Rubber Collet Holder Size: H1= 1.6 x 1.6 mm H2= 2.6 x 2.6 mm Other= Customize Size